nook miniatures
Miniature Domed Pendant Light – STL Files

Miniature Domed Pendant Light – STL Files

$6.50
1
Print your own miniature domed pendant light in 1:12 scale — and light it your way. This STL set includes two lighting versions plus a no-LED option, in two dome sizes, so one download covers wired, battery, and unlit installs. What's included (7 STL files) Wired LED version Small dome pendant for wiring Large Dome Pendant for Wiring Dome pendant ceiling cap for wiring Battery + Magnetic LED version Small dome pendant Large dome pendant Pendant ceiling cap for Magnet Dome Ceiling Canopy Solid The download also includes a Read Me (PDF + text) with full step-by-step instructions for all three setups and a complete materials list with links. Three ways to use it Wired LED — thread thin LED wires through the designed wire channels, cover visible wires with 1mm heat shrink tubing, and wrap or solder to your power source wires (Marie uses a 3V battery pack). Magnetic battery LED — pop a magnetic battery-operated LED (~8–10mm) inside the shade with a sticky dot; two 8mm × 1mm magnets (one in the canopy, one on the ceiling) hold the fixture up, and you tap a magnet near the LED to switch it on and off. No LED — hang it unlit with 26 gauge black floral wire and super glue. Watch it being made Marie walks through both wiring methods in her video "2 Easy Ways to Wire Miniature Lights | DIY Dollhouse Lights": https://youtu.be/g4X8ogM27_8 For the battery version, watch "DIY Battery Operated Dollhouse Light, no wiring! (and it's cheap!)": https://youtu.be/ujPYu4BmpjE — Marie makes this exact pendant with a battery-operated LED that switches on and off with a magnet, no wiring at all. What you'll need (not included) Wired version: 3V battery pack, warm white LEDs, 1mm heat shrink tubing (soldering iron, solder, and helping hands if you solder) — exact product links are in the Read Me. Magnetic version: magnetic battery-operated LEDs (AliExpress link in the Read Me), sticky dots (https://a.co/d/7h9Zp07), 26 gauge black floral wire, 8mm × 1mm magnets (https://a.co/d/byiRfy8), super glue. Optional — the gold finish as shown in the video: chrome gold powder (https://a.co/d/hYz5N0Q), UV gel polish (https://a.co/d/cNt5cYH), and a UV lamp (https://a.co/d/fY8ywdE). Printing notes Resin printers give the finest detail and smoothest finish; FDM works too — use a 0.2mm layer height. Supports may be required for overhangs (check your slicer settings). Use a light-diffusing resin or filament for a softer lighting effect. Please note This is a digital download — no physical item will be shipped. License: You may make physical copies of the product for personal use only. You may not sell, share, gift, or otherwise redistribute the digital file or physical copies made from it. Commercial printing rights are available only through a paid Nook Miniatures Patreon membership (Nook Makers tier) while the membership is active. Results can't be guaranteed because every printer and slicer is different. Nook Miniatures — shop: nookminiatures.com · Patreon: patreon.com/cw/NookMiniatures · YouTube: Nook Miniatures

You might also like